May 3, 2025

Whirlpool Washer Error Code F5 E2 – Lid Lock Won’t Lock

The F5 E2 error on a Whirlpool washer indicates a problem with the lid lock mechanism. This code typically appears when the control board detects that the lid is not locking or unlocking as expected during a wash cycle.

What Causes the F5 E2 Error?

Common causes of this issue include:

• Faulty or stuck lid lock switch
• Broken lid strike (the part that presses into the lock)
• Wiring issues between the control board and lid lock
• Obstruction preventing the lid from closing fully

How to Fix Whirlpool F5 E2

1. Unplug the Washer: Disconnect power before inspecting the unit.
2. Check the Lid and Strike: Inspect the lid strike for cracks or damage. Make sure the lid aligns properly with the lock slot.
3. Test the Lid Lock: With the washer unplugged, remove the top panel and locate the lid lock assembly. Check for loose or disconnected wires.
4. Run a Diagnostic Cycle: After reconnecting everything, run a diagnostic test mode. If the error persists, replace the lid lock assembly.

Need Whirlpool Washer Parts?

Find replacement lid locks, strikes, and control boards at DIY Appliance Parts Depot. Get fast shipping, OEM-quality parts, and expert repair support.